RODAK Drill Dust Collector, Connecting Size Between 30 to 38 mm

DIY projects can get messy. As you drill new holes, large or small, fine powder settles across the room. Use this Drill Dust Collector to control debris and leave your floors and surfaces dustless. The cushion in combination with the created suction through the vacuum cleaner has an adhesion effect for most flat masonry surfaces and ensures 100% dust collection. What you get is a safe and clean drilling experience while the lung and environment is protected from dust. Attach the vacuum cleaner accessory with any vacuum cleaner between 32 to 38 mm connecting sizes. Loosen the adapter while turning to the left, attach to the vacuum cleaner hose and tighten tightly through the right turning thread. The integrated rubber lining ensures an air tight connection. Now switch on the vacuum cleaner and place the Drill Dust Collector at the exact point where you want to drill. The Suction created by the vacuum cleaner will hold this Drill Dust collector against any flat surface. Now you can drill walls and other flat surface. Dust free drilling of up to 12 mm drill bit size. Hand free, no need to hold the attachment as long the surface is flat and even. If not sure about the connecting size please visit FAQ listed under Customer Service where we document and guide how to get to know the connecting size of any vacuum cleaner and accessories. Dust created by cutting, grinding, drilling can contain crystalline silica particles, commonly found in concrete or stone walls. These dust particles are very small and invisible to the naked eye. When inhaled, even in very small amounts, silica dust can cause serious health hazards called Silicosis, a fatal lung disease. There is no cure for this disease, but it is 100% preventable while protecting yourself in the first place from this dust entering the lungs.